Fiber proof testers are made to apply a set load to FTTH Cable Production Line in order to evaluate the potency of the spliced Fiber. Our Fiber proof testers can be purchased in both linear and rotary styles, for both proof and tension screening. Fiber proof testers are available for single mode, multimode, and polarization-maintaining fibers. Select from dedicated, stand alone techniques or multipurpose designs that are also capable of stripping, cleansing, cleaving, splicing, and/or recoating.
Fiber Recoaters with Proof Testers offer simple, integrated methods to recoat and test fusion-spliced fibers. The Fiber recoating process restores the buffer coating to some removed Fiber, providing much more versatility than a heat-reduce protection sleeve, allowing it to be dealt with and coiled with no damage to the combination-spliced area. The integrated linear or rotary Proof tester enables customers to right away test a recoated Fiber with a pre-decided load and determine the long-phrase longevity of the Fiber. Because of their capacity to restore a combination-spliced Fiber to near initial problem, these techniques are perfect for applications such as undersea visual Fiber cables, submarine interaction wiring, Fiber lasers, or Distributed Bragg Reflector (DBR) lasers.
The procedure starts off with the combination-spliced section of Fiber being positioned in the midst of the mold set up (see image for the right). Once set in place, inserts in the Fiber obstructs secure the spliced Fiber set up. Recoat materials is motivated in to the cavity and after that Ultra violet-cured. The recoated Fiber can then be analyzed by pulling onto it up to and including pre-decided weight.
Recoater and Mold Set up Choices – Recoaters can be purchased with either an automatic or manual mold set up. The automatic mold assembly features pneumatic control of the mold dishes and is also optimized for high-volume manufacturing applications. Handbook mold assemblies, on the other hand, use easy-to-open mold plates that offer more versatility and are ideal for reduced-volume manufacturing or RAndD applications. A computerized or handbook volumetric dispensing pump and injection system is employed to inject the recoat material in to the mold cavity.
The SZ Stranding Line comes regular using a mold assembly for Ø430 µm covered fibers; For the handbook recoaters (Item #s PTR206, PTR206B, PTR307, and PTR307B), the mold assembly comes individually so that customers can choose the right mold covering size for their program. Custom mold covering sizes can be found approximately Ø900 µm. Pre-installation of the mold assembly on the factory can also be available. Contact Tech Assistance for more information on custom molds or manufacturer set up.
We provide you with each high-index (Item # AB950200) and reduced-index (Item # PC373) recoat materials to be used in these recoaters. Recoaters with handbook injection pumps (Product #s PTR206B and PTR307B) are appropriate for both types of recoat material; all the other recoaters are suitable for the high-directory materials only. Our handbook recoaters with an automated injection system (Product #s PTR206 and PTR307) can be customized to work with both the reduced- and high-directory recoat materials; please get in touch with Technology Assistance for more information.
Proof Tester Choices – The PTR206, PTR206B, and PTR208 Fiber Recoaters include a built-in linear Proof tester, which takes the Fiber up to and including predetermined load (20 N) and after that releases it. The linear Proof tester uses the same Fiber holding obstructs since the recoater and therefore the Fiber does not need to be moved prior to testing. The PTR307 and PTR307B Fiber Recoaters come with a built-in rotary Proof tester, which can perform each Proof and stress tests (?89 N). A single set of Proof test grips is provided; substitute Proof check grips are available listed below in packs of 10. Every screening process is completely programmable via the included handset or tablet control, enabling qyjflh user to pick guidelines such as the load, the rate at which the load is applied, as well as the hold time.
Inserts for Fiber Holding Blocks – Along with the previously mentioned, we provide a number of inserts for use in the Fiber keeping obstructs from the recoaters in order to back up a wide range of Fiber Drawing Machine coating diameters. For recoaters using a rotary Proof tester, the inserts are suitable for Fiber covering diameters in a range from 125 µm to 900 µm. For recoaters with a linear Proof tester, the inserts include a range for Fiber coatings from Ø250 µm to Ø900 µm.